Home-Blog | July 26 , 2024

When a pilot prepares to take off in an airplane, she refers to a checklist to insure the accomplishment of every task necessary for a safe flight. In much the same way, the preparation of a showcase full of jewelry for a day’s retail effort requires organized and complete preparation. The following checklist is offered as a guideline for reference.

Successful jewelers update their checklists periodically and are certain new associates are familiar with, and diligently follow, the approved procedure.

Checklist

Prior to the installation of the jewelry merchandise: 

     1. Check to be certain the floorboard and risers are clean, free of marks. 

     2. Wipe the inside of the glass - front, both sides, and underneath side of the top. 

     3. Straighten the risers, signage and trim pieces in the case

     4. Confirm the merchandise is clean and presentable. Polish any substandard pieces. 

     5. Locate the showcase map identifying the location of all displays and merchandise.

After installation of the jewelry: 

     1. Confirm that all jewelry is properly affixed to the display elements.

     2. Confirm that all goods are capable of being accessed by store associates with reasonable effort.

     3. Confirm the layout of merchandise conforms to the approved showcase map.

     4. Replace sold merchandise

     5. Con rm position and selection of all “key item” merchandise.

Prior to Opening: 

     1. Locate a counterpad and polishing cloth for each showcase or category. 

     2. Locate and position a ring-sizer chain, stick, loupe, or gem scope, as needed. 

     3. Position business cards, copies of any current promotional materials and a pocket calculator nearby. 

     4. Clean top of showcase glass and stow cleaner out of sight but nearby for touchups.

     5. View the final visual presentation from the customer’s side of the showcase for any final adjustments. 

     6. Confirm all countertop displays are positioned not to block the view of merchandise underneath.

Blog  from LP

Updated: July 26, 2024

Hi, I’m Ethan, the Co-founder of Lepack Manufacturing .,Limited. I’ve been running a factory in China that makes display and box for over 10 years now, and the purpose of this article is to share the knowledge related to DISPLAY and Box from a Chinese supplier’s perspective.

Next